Ginantsilyo

It has been a long time since i made my first free pattern on sale, now I am giving it for free. Thanks for visiting my site

Description of the project:

The idea behind the project is to create a simple shrug out of crocheted square, slip stitched
at both ends to form the sleeves. This shrug is made in rows and does not need sewing. It’s
great for crocheters who want easy, lightweight project that could be done in three hours or
less.
The shrug is made from soft cotton of bulk weight using 4.0mm crochet hook (US Size).

The pattern consists of the usual combination stitches:

• 4dc open shell with 1 ch
• 3dc closed shell
• crossed Fpdc (Front Post Double crochet) with 1 ch
• 3 dc cluster.

These stitches will be described more in the section: Special Stitches.

Finished Project:

This is the finished product. It’s great for tube – blouse, spaghetti- strapped blouse, a tube
dress.

Violet Square To Shrug Front

Square to Shrug Violet Shrug Free Crochet Pattern

Square to shrug Black by oriane1394 of Ravelry.com

Materials:
4.0mm hook
Soft Cotton Thread Bulk Weight approximately 100g

Violet Yarn Bulky Soft Cotton

Gauge:
5 chain is approximately 1 in.

Special Stitches:

4dc open shell with 1 ch (4DC Open Shell) – Make 2dc on next st, ch 1 2dc on same st.

3dc closed shell – Make 3dc on next st.

Front Post Dc – YO, then put the hook from front to back, between the stitches, around behind
the DC and out before the next stitch then complete the DC as normal.

3dc cluster: (Yo, insert hook in next st, yo draw yarn through st, yo, draw yarn through two
loops on hook) 3 times. yo, draw yarns through 4 loops on hook.

Crossed FPDC (2 crossed FPDC with 1 ch in between): This stitch is worked over an area of three stitches. To begin, skip two stitches, Make FPDc on third stitch. Ch 1, Make FPDc on
the first st that was skipped.

stitch diagram legend for square to shrug

Instructions:

Foundation Chain: Ch 122.
Row 1, 25: ch 3 (counts as 1 dc) , ch 2 skip 2 ch, dc on next ch. Repeat until last ch. Turn
Row 2-4, 22-24: ch 3 (counts as 1 dc), ch 1, 2 dc on same st. skip 1dc. *Make a 4dc open
shell on next dc*. Repeat across except for the last st. Make 2dc on last st. ch 1, dc on same
st. turn.
Row 5, 9, 13, 17, 21: ch 3(counts as 1 dc), * ch 5, dc on next ch sp*, repeat * across. Turn.
Row 6, 10, 14, 18: ch 3 (counts as 1 dc) * ch 3, make 3dc closed shell on next dc of previous
row, ch 3, dc on next dc of previous row*,. Repeat * across. Turn
Row 7, 11, 15, 19: ch 3 (counts as 1 dc), *ch 3, make crossed FPDc on next 3dc cluster of
previous row, ch 3, dc on next dc of previous row* Repeat * across. Turn.
Row 8, 12, 16, 20: ch 3 (counts as 1 dc), * ch 4, make 3dc cluster on crossed FPDc of
previous row, ch 3, dc on next dc of previous row* Repeat * across. Turn
Finishing: Slip stitch ends  (13 stitches from ends [each four corners]) together to form the sleeves.

Square to Shrug Stitch Diagram -->Click Image to See Original Size

Violet Wrist Band with Buttons

NOTE: If you want to order a blouse of the same kind, kindly leave a comment below

Materials:

Materials Used for making crocheted wrist band

• 8 metal links
• 1 wire with loop at end
• buttons
• Chrochet Thread (texture is like the DMC Thread used for cross stitch).
• 2 metal bars
• 1.6 mm crochet hook
• needle (big)

I bought the metal links, bars, and wires at Quiapo. The metal bars costs around 20Php/pack (contains 10), the links and wires are around the same price.

The buttons I used came from stashed buttons given to me by a local wholesale store of threads and other tailoring needs. (I’ll post a blog later)

Choose Buttons with this kind of back:

Buttons used

The purpose of this is the button will serve as the lock of the band.

The yarn’s frm Rosario Pasig. It was given to me free by the manong. Because I bought two kilos of yarns from him.

All in all, the materials came cheap. It took me less than 30 minutes to create this accessory.

Instructions:

Make a knot

Tighten the knot

Make a knot around one metal bar. And tighten it.This will serve as your first sc.

Make 8 sc around the chain like this:

First row of single crochet

Turn around. Chain 3 (serve as 1 dc). 8 DC into each next sc.

Second row of 9 dc

Create 9 rows with 9 DC.

Cut the yarn with a scissor, We will have to sew the yarn into the second metal bar with a needle.

Sewing the other end

The crocheted wrist band

Attach 3 metal links on each side of the metal bars. Then connect the 3rd links from both sides with the loop of the our wire.

Putting the links and improvised hook

Form the wire into a hook.

Improvised Hook

Attach three links in each side on the other metal bar. COnnect the 3rd links with another metal link. Connect the fourth link and the button using another metal link.

With Buttons Attached

Improvised Headband

Materials needed:

Variegated Pink Wool and Pink Cotton Yarn

Materials for the headband

• YARNS (of course!) – I used a variegated pink wool (bulky) and soft cotton
• Plain black headband
• A hook (4.5 mm)
• Adhesive tape (Double sided) – Glue STick is much better, mind you.
• some leaves to accentuate
• button for the flower applique
• needle

Using the variegated wool yarn crochet chain to cover the entire length of the head band.

Cover the headband with the crocheted chain. Put it in place using an adhesive tape. It is much better to glue it with a glue stick, but my glue gun’s at home back in the province so i have to improvise.

Create a 5 Flower applique using the solid pink cotton yarn.

- Chain 3 slip stitch to form a ring. *Chain 4, slip stitch into the ring * (Repeat 4 more times)

Attach a yellow button to the flower.

Attach five leaves at one side of the headband.

Attach the flower applique by sewing it into the headband.

Now you have an improvised headband. Pretty easy right?

Momoink loves it so much that she tries it on:

Momoink loves the headband

Project Description

This is the first crocheted clothing I made from baguio yarns. Stitch-wise, this clothing is easy to do. But if you are not as patient, this would be too tiring, too repetitive and boring. I barely managed to finish it, not because I wanted to, but felt compelled to. It’s because if i left this unfinished, it would forever be. And so, to make full use of the newly purchased yarns by michael, I finished this clothing and felt proud.

You could increase the length of the blouse by adding another row. This project is made from the sleeves down. It is convenient to wear even without a tube underneath since the stitches are kinda thick, you wouldn’t feel so anxious.

Read the inspiration/background for this in related posts: Part I & Part II

Finished Product

Pyschedelic Shell

Pyschedelic shell worn by momoink

Description of the Project

A cool blend of turquiose and white hues that will remind you of the coming holiday season. This practical project uses up a simple combination of double-crochet and chain stitches adorned with fluffy plush yarn. I used just a 100g ball of Indonesian Cotton Thread. You could actually substitute any locally available crochet thread and just adjust the gauge. Luckily for us, the soft plush turquiose yarn used for the borders of the clothing is available locally. I got this one from Bodega sa Rosario, Pasig.

The bolero is made up of 5 parts, crocheted individually. 2 sleeves, 2 front parts and the back part. I sewed them together using left over crochet thread. Then I added the border. The border’s just plain dc. I used automatic locks to close the front part. And attached two medium sized white textured buttons in front to accentuate.

Finished product:

winter solace bolero

Read more

Butterfly in Venetian Crochet

Introduction:

I got this pattern from A. W. B. Crochet Book, I downloaded from Antique Pattern Library. The book is not easy to read. It requires basic knowledge of crochet sticthes and uses a lot of abbreviations. It took a while before I was able to comprehend one crochet instruction, and this is it.

I am specially attracted to butterfly motifs, pendants or appliques that’s why i chose to follow this particular pattern. The crochet instructions that follow is a direct excerpt from the book:

The applique is made from separate parts sewed together, something much akin to irish crochet. Of course since the book is an irish crochet book.

Instructions:

BODY -

Ch 8, miss 1, d into each of the next 6 st, 3 d into end st or topl work d along other side of ch and 3 d at other end also. Work all the way round again with d, working 3 d into the end st, and when you reach the top again, ch 9, fasten into the last d, forming a ring for the head. Over the ring, work 5d; * ch 20, fasten back into 10th st, sl st back to head; * 1 d over ring, repeat from * to *; 5 d over ring, 1 d into same top st on body; work d down to lower end. Ch 11 for second section of body, work d all around three times and a half, always working 3 d into each end, and fasten off at top of section, under upper section.

WINGS -

for the upper wings, work the picot braid the length needed. For the half og th eupper wings and for the lower wings, work pieces of plain braid. (For directions see post about braid)

To form the points in the lower wings, work 1d, 1 ch and 1d into the same st, and in the last row, work 1d picot and 1d into each point; between the points, miss 1 spaces and 2 or 3 st in the longer spaces, to obtain the in-curve.

RINGS -

14d over a ring of 8ch, and 18d over a ring of 10ch. Make four of the larger rings and two of the smaller.

After all the separate pieces are made, baste them face down on the pattern as shown. Sew securely together and put in a filling of twisted bars and Bruges knot.